Shimadzu GC-2010 Plus - Monitoring the Temperature with [Temp Mon]; Screen Description; PF Menu

9 Monitoring the GC
9.2
9.
98
GC-2010 Plus
9.2Monitoring the Temperature with [Temp Mon]
9.2.1 Screen description
Press [Temp Mon] (PF menu) from the [MONIT] key main screen to display the Temp Moni-
tor screen shown in Fig. 9.2.1.
Monitor the temperature of all installed column ovens, injection ports and detectors from this
screen.
NOTE Heated zones without installed components are not displayed on the screen.
9.2.2 PF menu
Fig. 9.2.1 Temperature monitor
PF menu Description
Reference
section
Flow Mon Monitor pressure and flow rate for the injection ports and detectors. 9.3
The components that are
included in the current ana-
lytical line are underlined.