Shimadzu GC-2010 Plus - Standard Installation Test; Screen Description; PF Menu

14 Diagnosis
14.5
14.
194
GC-2010 Plus
14.5Standard Installation Test
After the system has been installed by your Shimadzu representative, the standard installation
test is performed to check whether the system is functioning properly.
14.5.1 Screen description
Select “5. STANDARD INSTALLATION” from the [DIAG] key screen to display the Standard
installation screen shown in Fig. 14.5.1.
The installation test can be performed at any time to check for proper functioning. From this
screen, load the analytical conditions of the standard installation test.
14.5.2 PF menu
Fig. 14.5.1 Standard installation test main screen
PF menu Description
Reference
section
Load
Automatically sets the analytical conditions of the standard installation test.
When [Load] (PF menu) is pressed, “TEST” is displayed for the used file
name.
――
Unload Returns analytical conditions to their former status.
――