Shimadzu GC-2010 Plus - Editing a Batch Schedule

16 Special Functions
16.2 Batch Schedule
227
GC-2010 Plus
16.2.8 Editing a batch schedule
To change an existing batch processing schedule, move the cursor using the [ △ ] and [ ▽ ]
keys to the schedule to be edited and press the [ENTER] key. The schedule to be edited
appears on the edit screen.
To change the vial number, enter the new number from the edit screen and press the
[ENTER] key. Then press [Finish] (PFmenu).
To change the other parameters, move the cursor and make the change from the edit
screen, and then press [Finish] (PFmenu).
To cancel the edits and restore the original batch schedule, press [Cancel] (PFmenu) before
pressing [Finish](PFmenu).