Shimadzu GC-2010 Plus User Manual

14 Diagnosis
14.1 Standard Diagnosis
180
GC-2010 Plus
14.1.7 Stopping/exiting the diagnosis
Press [Stop Diag] (PF menu) during diagnosis to display the diagnosis stop screen shown in
Fig. 14.1.4.
When the diagnostics are allowed to complete, the total diagnosis results (Test Result) and
the number of abnormalities (Number of NG) are displayed.
14.1.8 PF menu
Fig. 14.1.4 Diagnosis stops
PF menu Description
Reference
section
Details
When the diagnosis is stopped, diagnosis results up to that time are dis-
played.
When the diagnosis ends, the diagnosis results of all items are displayed.
Press [Print] (PF menu) to print out the displayed diagnosis results to a
Chromatopac.
14.1.9

Shimadzu GC-2010 Plus Specifications

General

Type	Gas Chromatograph
Model	GC-2010 Plus
Manufacturer	Shimadzu
Maximum Temperature Ramp Rate	120 °C/min
Detector Options	FID, TCD, ECD, FPD, NPD, MS
Electronic Flow Control (EFC)	Yes
Data Sampling Rate	Up to 250 Hz
Column Oven Temperature Range	Ambient +5°C to 450°C
Maximum Oven Heating Rate	120 °C/min
Injection Port	Split/Splitless, PTV
Display	LCD