Shimadzu GC-2010 Plus - PF Menu List; Creating a New Batch Schedule (for Dual Injectors)

16 Special Functions
16.2 Batch Schedule
226
GC-2010 Plus
16.2.6 PF menu list
16.2.7 Creating a new batch schedule (for dual injectors)
Select [New] (PF menu) from the batch schedule screen to display the new batch schedule
screen shown in Fig. 16.2.3.
The vial set up screens are divided into main set up and sub set up screens.
Once the main injector setup is complete, the sub injector setup screen appears. On the
screen, two lines (one for the main and the other for the sub) make one schedule.
Set an item using the [ △ ] and [ ▽ ] keys and [ENTER] key. When [Finish] (PF menu)
becomes available and the items have been set, press [Finish] to validate the schedule.
PF menu Description
Reference
section
Finish Validates and saves the schedule.
――
Prev Page Returns to previous setup screen.
――
Next Page Moves to setup screen for next item.
――
Cancel Cancels the schedule being created.
――
Fig. 16.2.3 New batch schedule screen (for dual injector)
The dual injector parameters
are the same as the single
injector parameters.