Shimadzu GC-2010 Plus User Manual

16 Special Functions
16.8
16.
266
GC-2010 Plus
16.8Stopwatch
16.8.1 Screen description
Select “8. STOP WATCH” from the [FUNC] key screen to display the stopwatch screen
shown in Fig. 16.8.1.
The stopwatch can display elapsed time up to 99 : 99 : 99.9 in units of 0.1 second. When the
counted time exceeds 99 : 99 : 99.9, the stopwatch is reset and the time restants at 0.0
seconds.
The stopwatch can function even when other keys are pressed. However, once the stop key
is pressed, the stopwatch is reset to 0.0 seconds if another key is pressed.
16.8.2 PF menu
16.8.3 Timing with inverse measurement
When using a bubble film flow meter of V ml, obtain the flow rate using the inverse number.
Fig. 16.8.1 Stop watch screen
PF menu Description
Reference
section
Start Starts timing.
If “Start” is pressed again when the timing has stopped, the stopwatch is
reset to 0.0 seconds.
――
Stop Stops counting.
――
V x (Inverse number of measurement time) ml/min

Shimadzu GC-2010 Plus Specifications

General

Type	Gas Chromatograph
Model	GC-2010 Plus
Manufacturer	Shimadzu
Maximum Temperature Ramp Rate	120 °C/min
Detector Options	FID, TCD, ECD, FPD, NPD, MS
Electronic Flow Control (EFC)	Yes
Data Sampling Rate	Up to 250 Hz
Column Oven Temperature Range	Ambient +5°C to 450°C
Maximum Oven Heating Rate	120 °C/min
Injection Port	Split/Splitless, PTV
Display	LCD