Shimadzu GC-2010 Plus User Manual

16 Special Functions
16.7 Service and Maintenance
261
GC-2010 Plus
16.7.3.2 Parameter list
INSTALLATION POSITION
Range: 0−9, Default: 0
Specify the component installation location by entering a numeric value from 1 to 8 as
shown in Fig. 16.7.3.
Set “0” when a unit is not installed. (or TCD pre-heater)
Set “9” when a unit is installed in a position not shown in Fig. 16.7.3.
Fig. 16.7.3 Component installation location
NOTE Changes are not in effect until the GC has been turned off and on.
8
7
6
5
4
3
2
1
Top view

Shimadzu GC-2010 Plus Specifications

General

Type	Gas Chromatograph
Model	GC-2010 Plus
Manufacturer	Shimadzu
Maximum Temperature Ramp Rate	120 °C/min
Detector Options	FID, TCD, ECD, FPD, NPD, MS
Electronic Flow Control (EFC)	Yes
Data Sampling Rate	Up to 250 Hz
Column Oven Temperature Range	Ambient +5°C to 450°C
Maximum Oven Heating Rate	120 °C/min
Injection Port	Split/Splitless, PTV
Display	LCD