EasyManuals Logo

Siemens CU240S DP-F Parameter Manual

Siemens CU240S DP-F
418 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #197 background imageLoading...
Page #197 background image
List of Parameters
Parameters
1-197
© Siemens AG 2007 All Rights Reserved
SINAMICS G120 Control Units CU240S, Edition 05/2007
Dependency: When Quick Commissioning is carried out P2000 is changed as follows: P2000 = P1082.
Caution: Parameter P2000 represents the reference frequency of the above mentioned interfaces.
A maximum frequency setpoint of 2*P2000 can be applied via the corresponding interface.
Unlike parameter P1082 (Max. Frequency) this limits the inverter frequency internally independent of the reference
frequency.
By modification of P2000 it will also adapt the parameter to the new settings.
Notice: Reference parameters are intended as an aid to presenting setpoint and actual value signals in a uniform manner.
This also applies to fixed settings entered as a precentage.
A value of 100 % correspondes to a process data value of 4000H, or 4000 0000H in the case of double values.
In this respect, the following parameters are available:
Note: Changes to P2000 result in a new calculation of P2004.
p1070
y[Hz]
2000p
4000[Hex]
r2015[1]
y[Hz] â‹…=
r2015
[0]
[1]
[2]
[3]
p2016
[0]
[1]
[2]
[3]
r0021
x[Hz] y[Hex]
x[Hex]
]Hex[4000
p2000[Hz]
r0021[Hz]
y[Hex] â‹…=
USS-PZD
on RS232
USS-PZD
on RS232
PZD
f (Hex)
f [Hz]
Setpoint
channel
Motor
control
f_act f_act,limit
P1082
2000P
% 100
f(%)
2000p
4000(Hex)
f(Hex)
f[Hz] â‹…=â‹…=
f_act,limit = min(p1082, f_act)
f (%)
Normalization Limitation
Analog
Reference frequency
Reference voltage
Reference current
Reference torque
Hz
V
A
Nm
p2000
p2001
p2002
p2003
Reference power
kW
hp
p2004
f(p0100)

Table of Contents

Other manuals for Siemens CU240S DP-F

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens CU240S DP-F and is the answer not in the manual?

Siemens CU240S DP-F Specifications

General IconGeneral
BrandSiemens
ModelCU240S DP-F
CategoryControl Unit
LanguageEnglish

Related product manuals