Siemens CU240S DP-F - p2208[0...2] Fixed PID setpoint 8; Fixed PID setp. 8; p2209[0...2] Fixed PID setpoint 9; Fixed PID setp. 9; p2210[0...2] Fixed PID setpoint 10; Fixed PID setp. 10; p2211[0...2] Fixed PID setpoint 11; Fixed PID setp. 11

List of Parameters
Parameters
1-239
© Siemens AG 2007 All Rights Reserved
SINAMICS G120 Control Units CU240S, Edition 05/2007
Description: Defines Fixed PID Setpoint 8
Note: See P2201 (Fixed PID Setpoint 1).
Description: Defines Fixed PID Setpoint 9
Note: See P2201 (Fixed PID Setpoint 1).
Description: Defines Fixed PID Setpoint 10
Note: See P2201 (Fixed PID Setpoint 1).
Description: Defines Fixed PID Setpoint 11
Note: See P2201 (Fixed PID Setpoint 1).
Description: Defines Fixed PID Setpoint 12
Note: See P2201 (Fixed PID Setpoint 1).
p2208[0...2] Fixed PID setpoint 8 / Fixed PID setp. 8
Access level: 2 P-Group: Technology Data type: Floating Point
Quick comm. NO Active: YES Data set: DDS
Can be changed: U, T
Min Max Factory setting
-200.00 [%] 200.00 [%] 70.00 [%]
p2209[0...2] Fixed PID setpoint 9 / Fixed PID setp. 9
Access level: 2 P-Group: Technology Data type: Floating Point
Quick comm. NO Active: YES Data set: DDS
Can be changed: U, T
Min Max Factory setting
-200.00 [%] 200.00 [%] 80.00 [%]
p2210[0...2] Fixed PID setpoint 10 / Fixed PID setp. 10
Access level: 2 P-Group: Technology Data type: Floating Point
Quick comm. NO Active: YES Data set: DDS
Can be changed: U, T
Min Max Factory setting
-200.00 [%] 200.00 [%] 90.00 [%]
p2211[0...2] Fixed PID setpoint 11 / Fixed PID setp. 11
Access level: 2 P-Group: Technology Data type: Floating Point
Quick comm. NO Active: YES Data set: DDS
Can be changed: U, T
Min Max Factory setting
-200.00 [%] 200.00 [%] 100.00 [%]
p2212[0...2] Fixed PID setpoint 12 / Fixed PID setp. 12
Access level: 2 P-Group: Technology Data type: Floating Point
Quick comm. NO Active: YES Data set: DDS
Can be changed: U, T
Min Max Factory setting
-200.00 [%] 200.00 [%] 110.00 [%]