Siemens CU240S DP-F Parameter Manual

Parameters
List of Parameters
1-96
© Siemens AG 2007 All Rights Reserved
SINAMICS G120 Control Units CU240S, Edition 05/2007
Description: Allows ON/OFF1 command source to be selected using BICO.
Dependency: For digital inputs as command source BICO requires P0700 set to 2 (enable BICO).
The default setting (ON right) is digital input 0 (722.0).
Alternative source possible only when function of digital input 0 is changed (via P0701) before changing value of
P0840.
When Standard Telegram selected (p0700 = 6, p0922 = Standard Telegram), parameter cannot be changed.
Description: Allows ON/OFF1 command source to be selected using BICO.
Dependency: For digital inputs as command source BICO requires P0700 set to 2 (enable BICO).
The default setting (ON right) is digital input 0 (722.0).
Alternative source possible only when function of digital input 0 is changed (via P0701) before changing value of
P0840.
When Standard Telegram selected (p0700 = 6, p0922 = Standard Telegram), parameter cannot be changed.
Description: Allows ON/OFF1 command source to be selected using BICO.
Dependency: For digital inputs as command source BICO requires P0700 set to 2 (enable BICO).
The default setting (ON right) is digital input 0 (722.0).
Alternative source possible only when function of digital input 0 is changed (via P0701) before changing value of
P0840.
When Standard Telegram selected (p0700 = 6, p0922 = Standard Telegram), parameter cannot be changed.
Description: Allows ON/OFF1 command source to be selected using BICO.
Dependency: When Standard Telegram selected (p0700 = 6, p0922 = Standard Telegram), parameter cannot be changed.
p0840[0...2] BI: ON/OFF1 / ON/OFF1
CU240E
CU240S
Access level: 3 P-Group: Commands Data type: Unsigned32
Quick comm. NO Active: NO Data set: CDS
Can be changed: T
Min Max Factory setting
- - 722.0
p0840[0...2] BI: ON/OFF1 / ON/OFF1
CU240S DP Access level: 3 P-Group: Commands Data type: Unsigned32
Quick comm. NO Active: NO Data set: CDS
Can be changed: T
Min Max Factory setting
- - 2090.0
p0840[0...2] BI: ON/OFF1 / ON/OFF1
CU240S PN Access level: 3 P-Group: Commands Data type: Unsigned32
Quick comm. NO Active: NO Data set: CDS
Can be changed: T
Min Max Factory setting
- - 8890.0
p0840[0...2] BI: ON/OFF1 / ON/OFF1
CU240S DP-F Access level: 3 P-Group: Commands Data type: Unsigned32
Quick comm. NO Active: NO Data set: CDS
Can be changed: T
Min Max Factory setting
- - 2090.0

Siemens CU240S DP-F Specifications

General

Brand	Siemens
Model	CU240S DP-F
Category	Control Unit
Language	English