Siemens CU240S DP-F - 2.8 Setpoint Channel

Setpoint Channel
Function diagrams
2-355
© Siemens AG 2007 All Rights Reserved
SINAMICS G120 Control Units CU240S, Edition 05/2007
2.8 Setpoint Channel
Function diagrams
5000 – Setpoint channel and Motor control 2-356
5100 – PID Controller 2-357
5150 – Wobble Generator 2-358
5200 – Additional Frequency Modifications (AFM) 2-359
5300 – Ramp Function Generator 2-360