Parameters
List of Parameters
1-282
© Siemens AG 2007 All Rights Reserved
SINAMICS G120 Control Units CU240S, Edition 05/2007
Description: Displays the A5E number and the ps data versions
Index: [0] = A5E 1st 4 digits
[1] = A5E 2nd 4 digits
[2] = Logistic Version
[3] = Fixed Data Version
[4] = Calib Data Version
Description: Accesses special parameters for development (expert only) and factory functionality (calibration parameter).
Description: Used to classify firmware (only for SIEMENS internal purposes).
Index: [0] = CM label (increment/branch)
[1] = CM label (counter)
[2] = CM label
[3] = GUI ID
[4] = GUI ID
[5] = GUI ID
[6] = GUI ID
[7] = GUI ID
[8] = GUI ID
[9] = GUI ID
[10] = GUI ID
[11] = GUI ID major release
[12] = GUI ID minor release
Description: Displays the version for DriveMonitor.
Description: Counts the number of changed BICO links
r3930[0...4] PS Data version / PS Data version
Access level: 3 P-Group: - Data type: Unsigned16
Unit: - Data set: -
p3950 Access of hidden parameters / Access hidden par
Access level: 4 P-Group: - Data type: Unsigned16
Quick comm. NO Active: NO Data set: -
Can be changed: U, T
Min Max Factory setting
0 255 0
r3954[0...12] CM info and GUI ID / CC info GUI ID
Access level: 4 P-Group: - Data type: Unsigned16
Unit: - Data set: -
r3955 Version for DriveMonitor / DriveMon. version
Access level: 3 P-Group: - Data type: Unsigned16
Unit: - Data set: -
r3978 BICO counter / BICO counter
Access level: 4 P-Group: - Data type: Unsigned32
Unit: - Data set: -
To Next Page
Loading...
Need help?
General
