Connector/Binector (BICO)-Parameters
Parameters
1-309
© Siemens AG 2007 All Rights Reserved
SINAMICS G120 Control Units CU240S, Edition 05/2007
1.4.3 Binector Output Parameters
r0807.0 BO: Displays client access / Displays client ac
r1025.0 BO: Fixed frequency status / FF Status
r2032.0...15 BO: CtrlWrd1 from USS on RS232 / CtrlWd1 <- USS
r2033.0...15 BO: CtrlWrd2 from USS on RS232 / CtrlWd2 <- USS
r2036.0...15 BO: CtrlWrd1 from USS on RS485 (USS) / CtrlWd 1 <- COM
r2037.0...15 BO: CtrlWrd2 from USS on RS485 (USS) / CtrlWd2 <- COM
r2090.0...15 BO: Control word 1 from Fieldbus / CtrlWd1 <- FB
r2091.0...15 BO: Control word 2 from Fieldbus / CtrlWd2 <- FB
r2225.0 BO: PID Fixed frequency status / PID FF Status
r2811.0 BO: AND 1 / AND 1
r2813.0 BO: AND 2 / AND 2
r2815.0 BO: AND 3 / AND 3
r2817.0 BO: OR 1 / OR 1
r2819.0 BO: OR 2 / OR 2
r2821.0 BO: OR 3 / OR 3
r2823.0 BO: XOR 1 / XOR 1
r2825.0 BO: XOR 2 / XOR 2
r2827.0 BO: XOR 3 / XOR 3
r2829.0 BO: NOT 1 / NOT 1
r2831.0 BO: NOT 2 / NOT 2
r2833.0 BO: NOT 3 / NOT 3
r2835.0 BO: Q D-FF 1 / Q D-FF 1
r2836.0 BO: NOT-Q D-FF 1 / NOT-Q D-FF 1
r2838.0 BO: Q D-FF 2 / Q D-FF 2
r2839.0 BO: NOT-Q D-FF 2 / NOT-Q D-FF 2
r2841.0 BO: Q RS-FF 1 / Q RS-FF 1
r2842.0 BO: NOT-Q RS-FF 1 / NOT-Q RS-FF 1
r2844.0 BO: Q RS-FF 2 / Q RS-FF 2
r2845.0 BO: NOT-Q RS-FF 2 / NOT-Q RS-FF 2
r2847.0 BO: Q RS-FF 3 / Q RS-FF 3
r2848.0 BO: NOT-Q RS-FF 3 / NOT-Q RS-FF 3
r2852.0 BO: Timer 1 / Timer 1
r2853.0 BO: Nout timer 1 / Nout timer 1
r2857.0 BO: Timer 2 / Timer 2
r2858.0 BO: Nout timer 2 / Nout timer 2
r2862.0 BO: Timer 3 / Timer 3
r2863.0 BO: Nout timer 3 / Nout timer 3
r2867.0 BO: Timer 4 / Timer 4
r2868.0 BO: Nout timer 4 / Nout timer 4
r2886.0 BO: CMP 1 / CMP 1
r2888.0 BO: CMP 2 / CMP 2
r8890.0...15 BO: Control word 1 from Fieldbus / CtrlWd1 <- FB
r8891.0...15 BO: Control word 2 from Fieldbus / CtrlWd2 <- FB
To Next Page
Loading...
Need help?
General
