Siemens CU240S DP-F Parameter Manual

List of Parameters
Parameters
1-207
© Siemens AG 2007 All Rights Reserved
SINAMICS G120 Control Units CU240S, Edition 05/2007
Description: Displays number of USS character frame errors.
Index: [0] = USS on RS485
[1] = USS on RS232
Description: Displays number of USS telegrams with overrun error.
Index: [0] = USS on RS485
[1] = USS on RS232
Description: Displays number of USS telegrams with parity error.
Index: [0] = USS on RS485
[1] = USS on RS232
Description: Displays number of USS telegrams with unidentified start.
Index: [0] = USS on RS485
[1] = USS on RS232
Description: Displays number of USS telegrams with BCC error.
Index: [0] = USS on RS485
[1] = USS on RS232
Description: Displays number of USS telegrams with incorrect length.
Index: [0] = USS on RS485
[1] = USS on RS232
r2026[0...1] USS character frame error / USS char.frame err
Access level: 3 P-Group: Communications Data type: Unsigned16
Unit: - Data set: -
r2027[0...1] USS overrun error / USS overrun error
Access level: 3 P-Group: Communications Data type: Unsigned16
Unit: - Data set: -
r2028[0...1] USS parity error / USS parity error
Access level: 3 P-Group: Communications Data type: Unsigned16
Unit: - Data set: -
r2029[0...1] USS start not identified / USS start unident.
Access level: 3 P-Group: Communications Data type: Unsigned16
Unit: - Data set: -
r2030[0...1] USS BCC error / USS BCC error
Access level: 3 P-Group: Communications Data type: Unsigned16
Unit: - Data set: -
r2031[0...1] USS length error / USS length error
Access level: 3 P-Group: Communications Data type: Unsigned16
Unit: - Data set: -

Siemens CU240S DP-F Specifications

General

Brand	Siemens
Model	CU240S DP-F
Category	Control Unit
Language	English