Parameters
List of Parameters
1-286
© Siemens AG 2007 All Rights Reserved
SINAMICS G120 Control Units CU240S, Edition 05/2007
Description: PZD to Fieldbus.
Index: [0] = Transmitted word 0
[1] = Transmitted word 1
[2] = Transmitted word 2
[3] = Transmitted word 3
[4] = Transmitted word 4
[5] = Transmitted word 5
[6] = Transmitted word 6
[7] = Transmitted word 7
Description: Fieldbus diagnostic data display.
Index: [0] = FB Diag. 0
[1] = FB Diag. 1
[2] = FB Diag. 2
[3] = FB Diag. 3
[4] = FB Diag. 4
[5] = FB Diag. 5
[6] = FB Diag. 6
[7] = FB Diag. 7
[8] = FB Diag. 8
[9] = FB Diag. 9
[10] = FB Diag. 10
[11] = FB Diag. 11
[12] = FB Diag. 12
[13] = FB Diag. 13
[14] = FB Diag. 14
[15] = FB Diag. 15
Description: Fieldbus identification data display.
The different Fieldbus types (r8859[0]) are given below:
0 = No additional Fieldbus option available
1 = PROFIBUS DP
2 = DeviceNet
3 = CAN
4 = AS-i
5 = LON
6 = Modbus
10 = PROFInet IO
11 = ES bus (ET 200pro)
4660 = ES bus (ET 200S)
65535 = not defined
p8851[0...7] CI: PZD to Fieldbus / PZD to FB
CU240S PN Access level: 3 P-Group: Communications Data type: Unsigned32
Quick comm. NO Active: YES Data set: -
Can be changed: T
Min Max Factory setting
- - 52[0]
r8858[0...15] Fieldbus diagnostic data display / FB diag data displ
CU240S PN Access level: 3 P-Group: Communications Data type: Unsigned16
Unit: - Data set: -
r8859[0...7] Fieldbus identification data display / FB id data display
CU240S PN Access level: 3 P-Group: Communications Data type: Unsigned16
Unit: - Data set: -
To Next Page
Loading...
Need help?
General
