Siemens CU240S DP-F Parameter Manual

Parameters
List of Parameters
1-238
© Siemens AG 2007 All Rights Reserved
SINAMICS G120 Control Units CU240S, Edition 05/2007
Description: Defines Fixed PID Setpoint 3
Note: See P2201 fixed PID setpoint 1 (FF-PID 1).
Description: Defines Fixed PID Setpoint 4
Note: See P2201 (Fixed PID Setpoint 1).
Description: Defines Fixed PID Setpoint 5
Note: See P2201 (Fixed PID Setpoint 1).
Description: Defines Fixed PID Setpoint 6
Note: See P2201 (Fixed PID Setpoint 1).
Description: Defines Fixed PID Setpoint 7
Note: See P2201 (Fixed PID Setpoint 1).
p2203[0...2] Fixed PID setpoint 3 / Fixed PID setp. 3
Access level: 2 P-Group: Technology Data type: Floating Point
Quick comm. NO Active: YES Data set: DDS
Can be changed: U, T
Min Max Factory setting
-200.00 [%] 200.00 [%] 20.00 [%]
p2204[0...2] Fixed PID setpoint 4 / Fixed PID setp. 4
Access level: 2 P-Group: Technology Data type: Floating Point
Quick comm. NO Active: YES Data set: DDS
Can be changed: U, T
Min Max Factory setting
-200.00 [%] 200.00 [%] 30.00 [%]
p2205[0...2] Fixed PID setpoint 5 / Fixed PID setp. 5
Access level: 2 P-Group: Technology Data type: Floating Point
Quick comm. NO Active: YES Data set: DDS
Can be changed: U, T
Min Max Factory setting
-200.00 [%] 200.00 [%] 40.00 [%]
p2206[0...2] Fixed PID setpoint 6 / Fixed PID setp. 6
Access level: 2 P-Group: Technology Data type: Floating Point
Quick comm. NO Active: YES Data set: DDS
Can be changed: U, T
Min Max Factory setting
-200.00 [%] 200.00 [%] 50.00 [%]
p2207[0...2] Fixed PID setpoint 7 / Fixed PID setp. 7
Access level: 2 P-Group: Technology Data type: Floating Point
Quick comm. NO Active: YES Data set: DDS
Can be changed: U, T
Min Max Factory setting
-200.00 [%] 200.00 [%] 60.00 [%]

Siemens CU240S DP-F Specifications

General

Brand	Siemens
Model	CU240S DP-F
Category	Control Unit
Language	English