Parameters
Command and Drive Data Sets – Overview
1-302
© Siemens AG 2007 All Rights Reserved
SINAMICS G120 Control Units CU240S, Edition 05/2007
p0491[0...2] Reaction on speed signal loss / Select enc. type
p0492[0...2] Allowed speed difference / Allowed speed dif
p0494[0...2] Delay speed loss reaction / Dly speed loss rec
p0500[0...2] Technological application / Techn. application
p0601[0...2] Motor temperature sensor / Motor temp. sensor
p0604[0...2] Threshold motor temperature / Thresh. mot. temp.
p0610[0...2] Motor I2t temperature reaction / I2t temp. reaction
p0621[0...2] Motor temp. ident after restart / Mot.temp ident.
p0622[0...2] Magnetizing time for temp id after start up / Magnet. t temp id
r0623[0...2] CO: Display for the identified stator resistance / Act. stator resist
p0625[0...2] Ambient motor temperature / Ambient mot. temp.
p0626[0...2] Overtemperature stator iron / Overtemp.stat.iron
p0627[0...2] Overtemperature stator winding / Overtemp.stat.wind
p0628[0...2] Overtemperature rotor winding / Overtemp.rot. wind
r0630[0...2] CO: Motor model ambient temperature / Mot. model amb. te
r0631[0...2] CO: Stator iron temperature / Stat.iron temp
r0632[0...2] CO: Stator winding temperature / Stat.wind.temp
r0633[0...2] CO: Rotor winding temperature / Rot. wind.temp
p0640[0...2] Motor overload factor [%] / Motor ovl fact [%]
p1001[0...2] Fixed frequency 1 / Fixed frequency 1
p1002[0...2] Fixed frequency 2 / Fixed frequency 2
p1003[0...2] Fixed frequency 3 / Fixed frequency 3
p1004[0...2] Fixed frequency 4 / Fixed frequency 4
p1005[0...2] Fixed frequency 5 / Fixed frequency 5
p1006[0...2] Fixed frequency 6 / Fixed frequency 6
p1007[0...2] Fixed frequency 7 / Fixed frequency 7
p1008[0...2] Fixed frequency 8 / Fixed frequency 8
p1009[0...2] Fixed frequency 9 / Fixed frequency 9
p1010[0...2] Fixed frequency 10 / Fixed frequency 10
p1011[0...2] Fixed frequency 11 / Fixed frequency 11
p1012[0...2] Fixed frequency 12 / Fixed frequency 12
p1013[0...2] Fixed frequency 13 / Fixed frequency 13
p1014[0...2] Fixed frequency 14 / Fixed frequency 14
p1015[0...2] Fixed frequency 15 / Fixed frequency 15
p1016[0...2] Fixed frequency mode / FF mode
p1031[0...2] MOP mode / MOP mode
p1040[0...2] Setpoint of the MOP / MOP setpoint
p1047[0...2] MOP ramp-up time of the RFG / MOP ramp-up time
p1048[0...2] MOP ramp-down time of the RFG / MOP rampdown time
p1058[0...2] JOG frequency / JOG frequency
p1059[0...2] JOG frequency left / JOG frequency <-
p1060[0...2] JOG ramp-up time / JOG ramp-up time
p1061[0...2] JOG ramp-down time / JOG ramp-down time
p1080[0...2] Min. frequency / Min. frequency
p1082[0...2] Max. frequency / Max. frequency
p1082[0...2] Max. frequency / Max. frequency
p1091[0...2] Skip frequency / Skip frequency
p1092[0...2] Skip frequency 2 / Skip frequency 2
p1093[0...2] Skip frequency 3 / Skip frequency 3
p1094[0...2] Skip frequency 4 / Skip frequency 4
p1101[0...2] Skip frequency bandwidth / Skipfreq bandwidth
p1120[0...2] Ramp-up time / Ramp-up time
p1121[0...2] Ramp-down time / Ramp-down time
p1130[0...2] Ramp-up initial rounding time / Ramp-up ini. Trnd
p1131[0...2] Ramp-up final rounding time / Ramp-up final Trnd
To Next Page
Loading...
Need help?
General
