3. Then enter the password of the user.
Per default, a password is not assigned for the "SINAMICS" user. In this case, you can skip
the password input.
4. Click "Login".
When you have successfully logged in, the browser displays the user name at the top right.
The most important elements of your drive system are shown centrally in the view:
Logging out from the web server
1. In the window, click the icon with the user name at the top right.
2. Click "Logout".
If have changed the converter settings, a save prompt appears. You can select here
whether to save or discard the changes.
Figure 6-4 Save prompt when logging out
3. If you want to save the changes, click "Save".
Automatic logout
If you are not using the web server, access to the web server is automatically logged out after
10 minutes. You must log in again to access the web server.
Commissioning and diagnostics in the Web server
6.4 Login/logout
SINAMICS S210 servo drive system
Operating Instructions, 12/2017, A5E41702836B AA 117
To Next Page
Loading...
