Siemens SINAMICS S210 - 8 Technical Specifications; Technical Data and Properties of the Motor; Technical Features

Technical specifications
8
8.1 Technical data and properties of the motor
8.1.1 Technical features
Table 8-1 Technical features
Type of motor Permanent-magnet synchronous motor
Rotor inertia 1FK21 - High Dynamic - motor with low rotor inertia
1FK22 - Compact - motor with average rotor inertia
Power range 0.05 kW ... 0.75 kW for a line supply voltage of
1 AC 230 V
Cooling Natural cooling
Insulation of the stator winding according to
EN 60034-1
(IEC 60034-1)
1FK2☐02, 1FK2☐03:
Temperature class 130 (B) for a winding temperature of
ΔT = 80 K at an ambient temperature of +40 °C
1FK2☐04:
Temperature class 155 (F) for a winding temperature of
ΔT = 100 K at an ambient temperature of +40 °C
Pulse voltage insulation class according to
EN 60034-18-41 (IEC 60034-18-41)
IVIC: C
Operating range -15° to +40° C, derating at higher temperatures
Installation altitude (according to EN 60034–
1 and IEC 60034–1)
≤ 1000 m above sea level, otherwise power derating
Type of construction according to
EN 60034-7 (IEC 60034-7)
IM B5 (IM V1, IM V3)
Degree of protection according to
EN 60034-5 (IEC 60034-5)
IP64, optional IP65
Temperature monitoring Thermal motor model
Paint finish Anthracite (RAL 7016)
Shaft extension according to DIN 748-3
(IEC 60072-1)
Plain shaft, optionally with feather key and half-key bal‐
ancing
Radial eccentricity, concentricity, and axial
eccentricity according to DIN 42955
(IEC 60072–1)
1)
Tolerance N (normal)
Vibration severity grade according to EN
60034-14
(IEC 60034-14)
Grade A is maintained up to rated speed
Sound pressure level L
pA
(1 m) according to
DIN EN ISO 1680, max. tolerance + 3 dB(A)
Natural cooling: 55 dB(A)
Encoder systems, built-in with DRIVE-CLiQ
interface
● AS20DQC, absolute encoder singleturn 20-bit
● AM20DQC absolute encoder 20-bit + 12-bit multiturn
SINAMICS S210 servo drive system
Operating Instructions, 12/2017, A5E41702836B AA 175