Siemens SINAMICS S210 - Directives, Standards and Certificates for the Motor

Certificates for download
● EC declaration of conformity: (
https://support.industry.siemens.com/cs/de/de/view/
60438382)
● Certificates for the relevant directives, prototype test certificates, manufacturers
declarations and test certificates for functions relating to functional safety ("Safety
Integrated"): (https://support.industry.siemens.com/cs/ww/en/ps/13229/cert)
● Certificates of products that were certified by UL: (http://database.ul.com/cgi-bin/XYV/
template/LISEXT/1FRAME/index.html)
Standards that are not relevant
China Compulsory Certification
The converter does not fall in the area of validity of the China Compulsory Certification (CCC).
A.3.2 Directives, standards and certificates for the motor
Standards that are complied with
The motors of the series SIMOTICS S, SIMOTICS M, SIMOTICS L, SIMOTICS T,
SIMOTICS A, called "SIMOTICS motor series" below, fulfill the requirements of the following
directives and standards:
● EN 60034‑1 - Rotating electrical machines – Dimensioning and operating behavior
● EN 60204‑1 - Safety of machinery – Electrical equipment of machines; general requirements
Where applicable, the SIMOTICS motor series are in conformance with the following parts of
IEC / EN 60034:
Feature Standard
Degree of protection IEC / EN 60034‑5
Cooling
1)
IEC / EN 60034‑6
Type of construction IEC / EN 60034‑7
Connection designations IEC / EN 60034‑8
Noise levels
1)
IEC / EN 60034‑9
Temperature monitoring IEC / EN 60034‑11
Vibration severity levels
1)
IEC / EN 60034‑14
1)
Standard component, e.g. cannot be applied to built-in motors
Relevant directives
The following directives are relevant for SIMOTICS motors.
Appendix
A.3 Directives and standards
SINAMICS S210 servo drive system
Operating Instructions, 12/2017, A5E41702836B AA 747