2.2 The scope of supply for the system components
You must order the components individually.
Motor
The motor scope of delivery includes:
● A "Safety instructions" sheet
● A sheet referencing links to product information
Converter
The converter scope of delivery includes:
● The Quick Installation Guide (English)
● Shield plate
● A warning label for affixing in the control cabinet
● For FSB a ferrite core for EMC category C2
● The following connectors:
– X1: Line connection and external braking resistor (jumper for internal braking resistor is
enclosed.)
– X2: Motor connection
– X107: Motor holding brake
– X124: 24 V DC supply voltage
– X130: Connector for digital inputs
MOTION-CONNECT cable (OCC cable)
The scope of supply for the prefabricated MOTION-CONNECT cables includes:
● The MOTION-CONNECT cable with assembled connectors for connecting to motors and
encoders
● A shield clamp for the connection of the shield to the shield plate of the converter
● A safety data sheet
Details on the OCC MOTION-CONNECT cables can be found in the following Section:
Connection cables between the motor and the converter (Page 217).
Description
2.2 The scope of supply for the system components
SINAMICS S210 servo drive system
24 Operating Instructions, 12/2017, A5E41702836B AA
To Next Page
Loading...
