11.4 Accessories
11.4.1 Memory cards
Memory card for data backup and series commissioning
Use the following memory cards to backup data and for series commissioning:
Card type Article number
Empty SD card 6SL3054-4AG00-2AA0
SD card with firmware V5.1 6SL3054-4FB00-2BA0
These SD cards are also required to save licenses of functions that require a license. It is not
possible to use commercially available SD cards.
Note
Permissible memory cards
The integrated card reader supports SD cards up to a memory capacity of 2 GB.
SDHC or SDXC cards are not supported.
11.4.2 PROFINET patch cable
PROFINET patch cable
Use the following patch cable to network converters located adjacent one another via
PROFINET:
Cable type Length Article number
Industrial Ethernet TP cord, CAT 6A,
TP cable 4 x 2 conductors,
prefabricated with 2 RJ45 connectors
0.3 m 6XV1870-3QE30
0.5 m 6XV1870-3QE50
11.4.3 External line filter
The following external line filter is available for the converter:
Article number Rated current Type of connec‐
tion
Conductor cross-
section
Degree of
protection
Dimensions (W x H x D)
6SL3203-0BB21-8VA0 18 A 200 V … 240 V
1 AC
0.3 mm … 10 mm
2
IP20 59 x 153 x 55
Ordering data
11.4 Accessories
SINAMICS S210 servo drive system
Operating Instructions, 12/2017, A5E41702836B AA 219
To Next Page
Loading...
