Decommissioning and disposal
10
10.1 Removing and disposing of the motor
WARNING
Risk of injury through falling motors or machine components
Motors and machine components can fall when being dismantled from the machine. They
can cause serious injury or property damage.
● Secure the machine components being dismantled to prevent them falling.
The removal of the motor must be performed and/or supervised by qualified personnel with
appropriate expert knowledge.
Removing the motor from the machine
1. Check that all parts of the motor are in a no voltage condition.
2. Let the motor cool down enough so that you are not burnt.
3. Disconnect all electrical connections.
4. Remove the fixing elements from the motor.
5. Transport the motor to a suitable location for disposal.
You have removed the motor.
Dispose of the motor in accordance with the local legal requirements.
SINAMICS S210 servo drive system
Operating Instructions, 12/2017, A5E41702836B AA 213
To Next Page
Loading...
