Ordering data
11
11.1 Ordering data of the motor
You can configure the motor with the aid of the article number: The article number comprises
a combination of digits and letters. It is divided into three hyphenated blocks.
Description Data digits of the article number
1 2 3 4 5 6 7 - 8 9 10 11 12 - 13 14 15 16
SIMOTICS M-1FK2
synchronous servomotors
1 F K 2
Version
High Dynamic 1
Compact 2
Frame size / shaft height SH 20 0 2
SH 30 0 3
SH 40 0 4
Power range
High
Dynamic
SH 20 230 V 1 AC M
0
0.16 Nm P
rat
ed
50 W 0 2 0
230 V 1 AC 0.32 Nm 100 W 0 2 1
SH 30 230 V 1 AC 0.64 Nm 200 W 0 3 2
230 V 1 AC 1.27 Nm 400 W 0 3 4
SH 40 230 V 1 AC 1.27 Nm 400 W 0 4 4
230 V 1 AC 2.4 Nm 750 W 0 4 5
Compact SH 30 230 V 1 AC M
0
0.64 Nm P
rat
ed
200 W 0 3 2
230 V 1 AC 1.27 Nm 400 W 0 3 4
Cooling Natural cooling A
Winding, rated speed For converters connected to
max. 240 V
For converters connected to max.
480 V
3000 rpm at 230 V - G
1500 rpm at 230 V 3000 rpm at 400 V F
3000 rpm at 230 V 6000 rpm at 400 V K
Holding brake Without 0
With 1
Protection class IP64 0
IP65 with shaft sealing ring 1
Shaft geometry Plain shaft 0
Shaft with feather key 1
Plain shaft, alternative shaft geometry
(D x l; 11 mm x 23 mm), only SH 30
0 3 0 2
Encoder Absolute encoder, singleturn, 20 bit (encoder AS20DQC) C
Absolute encoder 20 bit + 12 bit multiturn (encoder AM20DQC) D
Type of connection OCC (one cable connection) for S210 A
Revision number 0
SINAMICS S210 servo drive system
Operating Instructions, 12/2017, A5E41702836B AA 215
To Next Page
Loading...
