Faults and alarms
13
13.1 Overview of faults and alarms
Explanations for the list of faults and alarms
A message comprises a letter followed by the relevant number.
The letters have the following meaning:
● A means "Alarm"
● F means "Fault"
● N means "No message" or "Internal message"
● C means "Safety message"
Information about reaction and acknowledgment is specified independently for a message with
changeable message type (e.g. reaction to F, acknowledgment to F).
Detailed examples:
Axxxxx Alarm xxxxx
Fxxxxx Fault xxxxx
Nxxxxx No message
Cxxxxx Safety message xxxxx
SINAMICS S210 servo drive system
Operating Instructions, 12/2017, A5E41702836B AA 291
To Next Page
Loading...
