A.4 Certifications
The safety functions of the SINAMICS S drive system meet the following requirements:
● Category 3 to DIN EN ISO 13849‑1
● Performance level (PL) d according to DIN EN ISO 13849-1
● Safety integrity level 2 (SIL 2) according to IEC 61508 and EN 61800-5-2
In addition, most of the safety functions of the SINAMICS S have been certified by independent
institutes. A list of currently certified components is available on request from your local
Siemens office.
Appendix
A.4 Certifications
SINAMICS S210 servo drive system
Operating Instructions, 12/2017, A5E41702836B AA 749
To Next Page
Loading...
