Description
2
The components described in this manual – motor, converter and associated connection
cables – are optimally tailored to one another and thereby facilitate the installation and
commissioning in a few steps.
The commissioning and diagnostics are performed with a PC or notebook (commissioning
device) via the web server integrated in the converter. A separate commissioning program or
diagnostics tool is not required.
Correct usage
The components are intended for industrial and commercial use in industrial networks.
The motor is only approved for operation with a converter.
For system-specific setting options, refer to the following Chapter:
Commissioning and diagnostics in the Web server (Page 105).
Typical applications
● Robots and handling systems
● Packaging, plastics and textile machines
● Wood, glass, ceramics and stone working machines
● Printing machines
SINAMICS S210 servo drive system
Operating Instructions, 12/2017, A5E41702836B AA 21
To Next Page
Loading...
