The parameter list is limited further after every further filter setting (the filters are linked via an
AND operation). The filters can be set in any order.
Note
Collapsing the filter bar
The filter bar is opened per default. To collapse the filter bar, click the arrow next to "Search
and Filters".
Resetting filters
As long as you are logged in to the Web server and the filter settings have not changed, the
parameter list is always displayed with the last filter settings. To reset all filter settings in the
parameter list, proceed as follows:
Click "Reset all filters" at the top right in the filter bar.
Commissioning and diagnostics in the Web server
6.6 Settings
SINAMICS S210 servo drive system
Operating Instructions, 12/2017, A5E41702836B AA 133
To Next Page
Loading...
