6.10.1 Backing up the parameter settings externally
You can back up the converter settings externally on the commissioning device via the web
server.
You can perform the data backup at any time. We recommend a data backup after the
commissioning of the converter.
1. Click "Back up parameters" in the "Parameter Backup" setting area.
The data backup of the parameters is performed. A message is displayed when the data
backup is successful.
Depending on the browser used, a storage dialog appears in which you can specify where
the backup file is to be saved.
In some browsers, e.g. Google Chrome, the file is stored in the standard directory for
downloads as "Backup.zip".
2. Correct the automatically generated name of the data backup so that the required data
backup can be clearly identified by the name when there are several data backups.
Note
The parameterization is saved in encrypted form during a data backup. Therefore, it is not
possible to check or edit parameters.
Commissioning and diagnostics in the Web server
6.10 Backup and restore
SINAMICS S210 servo drive system
154 Operating Instructions, 12/2017, A5E41702836B AA
To Next Page
Loading...
