6.6.3 Configuring digital inputs
In addition to the fail-safe digital input (F-DI, DI 2 and DI 3), the converter has two high-speed
digital inputs (DI 0 and DI 1) as measuring inputs and for the evaluation in the controller.
If you use these digital inputs, you have to set a telegram in the controller that transfers the
values, e.g. the PROFIdrive telegram 105.
The converter also has an input (DI 4) to monitor the temperature of an optional external braking
resistor.
Connection example (Page 103)
Commissioning and diagnostics in the Web server
6.6 Settings
SINAMICS S210 servo drive system
Operating Instructions, 12/2017, A5E41702836B AA 127
To Next Page
Loading...
