11.4.4 Cabinet bushing via mounting flange
Mounting accessories for connection system
Accessories Diagram For con‐
nector size
For motor Article number
Mounting flange as cabinet
bushing (with installation in‐
structions)
Packing unit: 1 item
M12 1FK2☐02
1FK2☐03
6FX2003-7JX00
M17 1FK2☐04 6FX2003-7HX00
The mounting flange is installed on the external wall of the control cabinet. It ensures the
degree of protection of the control cabinet.
● Install the mounting flange as specified in the enclosed installation instructions.
11.4.5 Degree of protection kit IP65 for the motor
Shaft sealing ring - IP65 degree of protection kit for the motor
The shaft sealing ring can be used as spare part or for retrofitting.
Note
You can order a motor with shaft sealing ring (degree of protection IP65) directly.
Additional information about ordering degree of protection IP65 can be found in Chapter:
"Ordering data of the motor (Page 215)"
The motor satisfies degree of protection IP65 when the shaft sealing ring is installed.
Motor article number Figure of the shaft sealing ring Article number of the degree of pro‐
tection kit
1FK2☐02 1FK2902-0GC00
1FK2☐03 1FK2903-0GC00
1FK2☐04 1FK2904-0GC00
Ordering data
11.4 Accessories
SINAMICS S210 servo drive system
220 Operating Instructions, 12/2017, A5E41702836B AA
To Next Page
Loading...
