11.5 Spare parts
Connector set 230 V 1 AC - 6SL3260-2DB00-0AA0
Under this article number, you will receive a spare parts package for the frame sizes FSA, FSB
and FSC with the following content:
● Connectors
– X1: Connector for line connection and external braking resistor (jumper for internal
braking resistor is enclosed.)
– X2: Connector for motor connection
– X107: Connector for motor holding brake
– X124: Connector for 24 V DC supply voltage
– X130: Connector for digital inputs
● Ferrite core
● Shield plate for FSA
● Shield plate for FSB and FSC
Terminal X1: Line connection and connection for external braking resistor
Pin Pin assignment Explanation
L1 Phase L1 line system
N Neutral conductor
DCP Braking resistor, external
Braking resistor, internal
If you are using the internal braking resistor, DCP
and R2 must be jumpered.
If you are using the external braking resistor, remove
the jumper between DCP and R2.
Connect the external braking resistor via the DCP
and R1 terminals.
R2 Internal braking resistor
R1 External braking resistor
Weidmüller: BLF 5.08HC/05/180F SN BK BX, article number 1012670000
As daisy chain: BLDF 5.08/05/180F SN BK BX, article number 1000970000
The terminals are spring-loaded terminals.
Permissible conductor cross-sections for single-core connection or for connecting flexible
cables with end sleeves:
● 0.2 mm
2
… 2.5 mm
2
, AWG: 26 … 12
Ordering data
11.5 Spare parts
SINAMICS S210 servo drive system
Operating Instructions, 12/2017, A5E41702836B AA 221
To Next Page
Loading...
