11.3 Connection cables between the motor and the converter
OCC MOTION-CONNECT cables can only be ordered as prefabricated cables.
OCC MOTION-CONNECT cable with SPEED-CONNECT connector
Designation and use Cable type For connection
to motor
Connector
size
Article number
1)
Motor connection cable OCC
MC 500 for predominantly fixed in‐
stallation
1FK2☐02
1FK2☐03
M12 6FX5002-8QN04-☐☐☐☐
1FK2☐04 M17 6FX5002-8QN08-☐☐☐☐
Motor connection cable OCC
MC 800PLUS for use in cable carrier
1FK2☐02
1FK2☐03
M12 6FX8002-8QN04-☐☐☐☐
1FK2☐04 M17 6FX8002-8QN08-☐☐☐☐
Extension cable OCC MC 500 for
predominantly fixed installation
1FK2☐02
1FK2☐03
M12 6FX5002-8QE04-☐☐☐☐
1FK2☐04 M17 6FX5002-8QE08-☐☐☐☐
Extension cable OCC MC 800PLUS
for use in cable carriers
1FK2☐02
1FK2☐03
M12 6FX8002-8QE04-☐☐☐☐
1FK2☐04 M17 6FX8002-8QE08-☐☐☐☐
1)
The last 4 positions (☐☐☐☐) define the cable length corresponding to the length code
Determining the article number of a prefabricated OCC MOTION-CONNECT cable
O
Figure 11-1 Lengths of an OCC MOTION-CONNECT cable
Procedure
1. Determine the required cable length l **. Consider having cable in reserve for strain-free
routing.
2. Determine the length code for the required length l ** corresponding to the following
overview. The stretched lengths (*) are added automatically for the prefabricated cables.
Ordering data
11.3 Connection cables between the motor and the converter
SINAMICS S210 servo drive system
Operating Instructions, 12/2017, A5E41702836B AA 217
To Next Page
Loading...
