WARNING
Fire due to inadequate cooling
Inadequate cooling can cause the motor to overheat, resulting in death or severe injury as a
result of smoke and fire. This can also result in increased failures and reduced service lives
of motors.
● Comply with the specified cooling requirements for the motor.
WARNING
Fire due to incorrect operation of the motor
When incorrectly operated and in the case of a fault, the motor can overheat resulting in fire
and smoke. This can result in severe injury or death. Further, excessively high temperatures
destroy motor components and result in increased failures as well as shorter service lives of
motors.
● Operate the motor according to the relevant specifications.
● Only operate the motors in conjunction with effective temperature monitoring.
● Immediately switch off the motor if excessively high temperatures occur.
CAUTION
Burn injuries caused by hot surfaces
In operation, the motor can reach high temperatures, which can cause burns if touched.
● Mount the motor so that it is not accessible in operation.
Measures when maintenance is required:
● Allow the motor to cool down before starting any work.
● Use the appropriate personnel protection equipment, e.g. gloves.
Fundamental safety instructions
1.1 General safety instructions
SINAMICS S210 servo drive system
16 Operating Instructions, 12/2017, A5E41702836B AA
To Next Page
Loading...
