Siemens SITRANS F - Page 121

Setup
3.4 Inputs and outputs
FST030
Function Manual, 04/2017, A5E35693328-AA
119
3.4.4.5.5 Upper range value
Description
Sets value at 100% of measuring span and corresponds to Frequency value high.
Setting and Default are sensor specific, depending on the setting in Process value and
depending on the Units setting.
Setting
-3682800.00 kg/h to +3682800.00 kg/h
Default
+3682800.00 kg/h
Related
Path
Setup → Inputs and outputs → Channel 2 - output → Frequency output → Upper range value
3.4.4.5.6 Lower range value
Description
Sets value at 0% of measuring span and corresponds to Frequency value low.
Setting and Default are sensor specific, depending on the setting in Process value and
depending on the Units setting.
Setting
0.00 kg/h to +3682800.00 kg/h
Default 0.00 kg/h
Related
Path
Setup → Inputs and outputs → Channel 2 - output → Frequency output → Lower range value
3.4.4.5.7 Damping value
Description
Time constant of damping filter for frequency output signal.
Setting
0.0 s to 100.0 s
Default
0.0 s
Related
Path
Setup → Inputs and outputs → Channel 2 - output → Frequency output → Damping value
3.4.4.5.8 Fail-safe behaviour
Description
Frequency output reaction in case of a fault.