Siemens SITRANS F - Page 150

Setup
3.4 Inputs and outputs
FST030
148 Function Manual, 04/2017, A5E35693328-AA
Related
Path Setup → Inputs and outputs → Channel 3 - input/output → Status output → Input/output
alarms (1)
3.4.5.8.12 Input/output alarms (2)
Description
Selection of alarm items that impact the output. Applicable if Status mode = Alarm item.
Availability of certain settings depends on Hardware and Software configuration.
Setting 186 CH3 input current too low; 187 CH3 input current too high; 188 CH3 external failure;
189 CH4 input current too low; 190 CH4 input current too high; 191 CH4 external failure
Default
None
Related
Path
Setup → Inputs and outputs → Channel 3 - input/output → Status output → Input/output
alarms (2)
3.4.5.8.13 Simulation alarms (1)
Description
Selection of alarm items that impact the output. Applicable if Status mode = Alarm item.
Setting
160 Mass flow simulated; 161 Volume flow simulated; 162 Density simulated; 163 Medium
temp. simulated; 166 Std. volume flow simulated; 167 Totalizer 1 simulated; 168 Totalizer
2 simulated; 169 Totalizer 3 simulated; 170 Loop current simulated
Default
None
Related
Path
Setup → Inputs and outputs → Channel 3 - input/output → Status output → Simulation
alarms (1)
3.4.5.8.14 Simulation alarms (2)
Description
Selection of alarm items that impact the output. Applicable if Status mode = Alarm item.