Siemens SITRANS F - Page 152

Setup
3.4 Inputs and outputs
FST030
150 Function Manual, 04/2017, A5E35693328-AA
Related
Path Setup → Inputs and outputs → Channel 3 - input/output → Status output → NAMUR status
signal
3.4.5.8.17 Polarity
Description
Logical polarity of status output.
Setting Active high level; Active low level
Default
Active high level
Related
Path
Setup → Inputs and outputs → Channel 3 - input/output → Status output → Polarity
3.4.5.8.18 On delay
Description
Sets the time delay between alarm condition and activating the output.
Setting
0.0 s to 100.0 s
Default
0.0 s
Related
Path
Setup → Inputs and outputs → Channel 3 - input/output → Status output → On delay
3.4.5.8.19 Off delay
Description
Set the time delay between resetting alarm condition and de-activating the output.
Setting
0.0 s to 100.0 s
Default
0.0 s
Related
Path
Setup → Inputs and outputs → Channel 3 - input/output → Status output → Off delay