C
ONFIGURING
THE
S
WITCH
3-178
should also determine security boundaries in the network and disable
GVRP on the boundary ports to prevent advertisements from being
propagated, or forbid those ports from joining restricted VLANs.
Note: If you have host devices that do not support GVRP, you should
configure static or untagged VLANs for the switch ports
connected to these devices (as described in
“Adding Static
Members to VLANs (VLAN Index)” on page 3-185). But you can
still enable GVRP on these edge switches, as well as on the core
switches in the network.
Port-based VLAN
1
2
9 3 4
10 11
12
13
14
5 6 7 8
15 16
18
19
To Next Page
Loading...
