VLAN C
ONFIGURATION
3-191
- If a port receives frames tagged for VLANs for which it is not a
member, these frames will be discarded.
-
Ingress filtering does not affect VLAN independent BPDU frames,
such as GVRP
or STP. However, they do affect VLAN dependent
BPDU frames, such as GMRP.
• Mode – Indicates VLAN membership mode for an interface. (Default:
Hybrid)
- 1Q Trunk – Specifies a port as an end-point for a VLAN trunk. A
trunk is a direct link between two switches, so the port transmits
tagged frames that identify the source VLAN. Note that frames
belonging to the port’s default VLAN (i.e., associated with the
PVID) are also transmitted as tagged frames.
- Hybrid – Specifies a hybrid VLAN interface. The port may
transmit tagged or untagged frames.
• Trunk Member – Indicates if a port is a member of a trunk. To add a
trunk to the selected VLAN, use the last table on the VLAN Static
Table page.
To Next Page
Loading...
Need help?
General
