Q
UALITY
OF
S
ERVICE
3-217
Command Attributes
Class Map
• Modify Name and Description – Configures the name and a brief
description of a class map. (Range: 1-16 characters for the name; 1-64
characters for the description)
• Edit Rules – Opens the “Match Class Settings” page for the selected
class entry. Modify the criteria used to classify ingress traffic on this
page.
• Add Class – Opens the “Class Configuration” page. Enter a class
name and description on this page, and click Add to open the “Match
Class Settings” page. Enter the criteria used to classify ingress traffic on
this page.
• Remove Class – Removes the selected class.
Class Configuration
• Class Name – Name of the class map. (Range: 1-16 characters)
• Type – Only one match command is permitted per class map, so the
match-any field refers to the criteria specified by the lone match
command.
• Description – A brief description of a class map. (Range: 1-64
characters)
• Add – Adds the specified class.
• Back – Returns to previous page with making any changes.
Match Class Settings
• Class Name – List of class maps.
• ACL List – Name of an access control list. Any type of ACL can be
specified, including standard or extended IP ACLs and MAC ACLs.
(Range: 1-16 characters)
• IP DSCP – A DSCP value. (Range: 0-63)
• IP Precedence – An IP Precedence value. (Range: 0-7)