C
OMMAND
L
INE
I
NTERFACE
4-14
The access mode shown in the following tables is indicated by these
abbreviations:
ACL (Access Control List Configuration)MST (Multiple Spanning Tree)
CM (Class Map Configuration) NE (Normal Exec)
GC (Global Configuration) PE (Privileged Exec)
IC (Interface Configuration) PM (Policy Map Configuration)
LC (Line Configuration) VC (VLAN Database Configuration)
Address Table Configures the address table for filtering specified
addresses, displays current entries, clears the table, or
sets the aging time
4-188
Spanning Tree Configures Spanning Tree settings for the switch 4-193
VLANs Configures VLAN settings, and defines port
membership for VLAN groups; also enables or
configures private VLANs and protocol VLANs
4-217
Class of Service Sets port priority for untagged frames, selects strict
priority or weighted round robin, relative weight for
each priority queue, also sets priority for TCP/UDP
traffic types, and DSCP
4-247
Quality of Service Configures Differentiated Services 4-197
Multicast Filtering Configures IGMP multicast filtering, query
parameters, specifies ports attached to a multicast
router, and enables multicast VLAN registration
4-268
IP Interface Configures IP address for the switch 4-290
DHCP Snooping Configures DHCP snooping 4-301
IP Source Guard Configures IP source guard security 4-296
IP Cluster Configures switch clustering 4-310
Table 4-4 Command Groups (Continued)
Command Group Description Page
To Next Page
Loading...
Need help?
General
