SMC Networks TigerSwitch SMC6128PL2 User Manual

I NTERFACE C OMMANDS
4-169
Interfaces Switchport Statistics
Field Description
Broadcast threshold Shows if broadcast storm suppression is enabled or disabled;
if enabled it also shows the threshold level (page 4-164).
Lacp status Shows if Link Aggregation Control Protocol has been
enabled or disabled (page 4-177).
Ingress rate limit Shows if ingress rate limiting is enabled, and the current rate
limit. (page -173).
Egress rate limit Shows if egress rate limiting is enabled, and the current rate
limit. (page -173).
VLAN membership
mode
Indicates membership mode as Trunk or Hybrid (page
4-226).
Ingress rule Shows if ingress filtering is enabled or disabled (page 4-228).
Note: Ingress filtering is always enabled.
Acceptable frame
type
Shows if acceptable VLAN frames include all types or tagged
frames only (page 4-227).
Native VLAN Indicates the default Port VLAN ID (page 4-229).
Priority for
untagged traffic
Indicates the default priority for untagged frames (page
4-247).
Gvrp status Shows if GARP VLAN Registration Protocol is enabled or
disabled (page 4-219).
Allowed Vlan Shows the VLANs this interface has joined, where “(u)”
indicates untagged and “(t)” indicates tagged (page 4-230).
Forbidden Vlan Shows the VLANs this interface can not dynamically join via
GVRP (page 4-231).
Private VLAN
mode
Shows the private VLAN mode as host, promiscuous, or
none (4-238).
Private VLAN
host-association
Shows the secondary (or community) VLAN with which this
port is associated (4-239).
Private VLAN
mapping
Shows the primary VLAN mapping for a promiscuous port
(4-240).

SMC Networks TigerSwitch SMC6128PL2 Specifications

General

Brand	SMC Networks
Model	TigerSwitch SMC6128PL2
Category	Switch
Language	English