Xerox WorkCentre 6605

Error Troubleshooting
Xerox Internal Use Only Phaser 6600 and WorkCentre 6605
Service Manual
2-71
950 113 DIAG_IMG06_B_LV Test Pattern 6
Parameter B
0-255 128 Image Path B Level
950 114 DIAG_IMG07_STEP Test Pattern 7
Parameter
0-65535 0 Output Thinning
Cycle (x100line)
950 115 DIAG_IMG08_STEP Test Pattern 8
Parameter
0-65535 0 Output Thinning
Cycle (x100line)
950 116 DIAG_IMG09_TEMP Test Pattern 9
Parameter
00Reserve
950 117 DIAG_IMG11_R_LV Test Pattern 11
Parameter
00Image Path R Level
790 308 FAX_DEF_CL Fax Default Color 0,1 0 0: Black & White
1: Color
790 304 FAX_DEF_RESO Fax Default
Resolution
0-3 0 0: Standard
1: Fine
2: Super Fine
3: Photo
790 302 FAX_DEF_ORIG_TYPE Fax Default
Original Type
0-2 0 0: Text
1: Text & Photo
2: Photo
790 301 FAX_DEF_DENSITY Fax Default
Density
-3-+3 0 -3 (Lighter3) - +3
(Darker3)
790 306 FAX_DEF_DELAY_H Fax Default
Specified Time -
Hour
0-23 21 0 h - 23 h
790 307 FAX_DEF_DELAY_M Fax Default
Specified Time -
Minute
0-59 0 0 min - 59 min
701 006 SYS_SET_FAX_TRANS SystemSetting
Sent/Unsent
Report
0-2 1 0: Do Not Deliver
1: Deliver Upon Error
2: Always Deliver
701 007 SYS_SET_FAX_BROAD SystemSetting
Broadcast Report
0-2 2 0: Do Not Deliver
1: Deliver Upon Error
2: Always Deliver
701 008 SYS_SET_FAX_PROTOCOL SystemSetting
Protocol Monitor
0-2 0 0: Do Not Deliver
1: Deliver Upon Error
2: Always Deliver
Parameter List
Chain Link Parameter Name Range
Fac’y
Def’lt
Note