Xerox WorkCentre 6605

Error Troubleshooting
Xerox Internal Use Only Phaser 6600 and WorkCentre 6605
Service Manual
2-175
024
024
024
910
911
958
IOT Paper Size
Mismatch
Detect Paper Size
Mismatch
BypassTray : 958
Tray 1 : 910
Tray 2 : 911
<Bypass Tray/Tray1>
Paper Size Mismatch
Load paper in NNN.
XXX
YYY
<Option Tray>
Paper Size Mismatch
Load paper in Tray 2.
XXX
YYY
Or check that the paper guide is
correctly set.
-
024
024
024
959
960
963
No Suitable Paper • Displayed when any of
the following errors
occurs and tray setting
needs to be changed
after paper is loaded.
• When paper source
auto selection is
selected, paper sizes of
all existing trays do not
match. (All Tray Size
Mismatch?
• When a tray is
specified, no paper is
loaded in the specified
tray. (Specified Tray
Empty?
• When a tray is
specified, paper size
loaded in the specified
tray does not match.
(Specified Tray Size
Mismatch?
• When Substitute Tray
is Off and a paper type
is specified, there is no
tray loading the
specified paper type.
(Specified Tray Media
Mismatch)
BypassTray : 963
Tray 1 : 959
Tray 2 : 960
<Bypass Tray/Tray1>
Paper not available
Load paper XXX / YYY in NNN.
<Option Tray>
Paper not available
Load paper XXX / YYY in Tray 2.
Or check that the paper guide is
correctly set.
-
WorkCentre 6605 Error Code List
Chain Link Error Error Details Control Panel Messages
FIP
location