144 Chapter 11
Using HP Instrument BASIC
Listing a Program (LIST)
Listing a Program (LIST)
You can output a program listing either on the screen or to the printer.
Displaying a program listing on the screen
You output a program listing on the screen as described below.
Step 1. Since a program listing is output on the BASIC area of the 4294A's LCD screen, you need
to reserve the BASIC area before outputting a listing. For the procedure, see
“Reserving an
Area for BASIC on the Screen” on page 139.
Step 2. Type LIST on the keyboard, then press the [Enter] key.
Outputting a program listing to the printer
NOTE Check that the printer is connected to the 4294A.
Step 1. Type PRINTER IS PRT on the keyboard, then press the [Enter] key to route the output to
the printer.
Step 2. Further, type LIST on the keyboard, and press the [Enter] key. Then the program listing
will be output to the printer.
Step 3. Type PRINTER IS CRT on the keyboard, then press the [Enter] key to switch the output
destination back to the 4294A's LCD screen.
To Next Page
Loading...
Need help?
General
