Agilent Technologies 4294A Programming Manual

424 Chapter 16
GPIB Command Reference
SCOL
SCOL
Syntax SCOL <numeric>
SCOL?
Description In the creation/edit of the list sweep table, specifies the trace color of each segment using
pen number in the HP Instrument BASIC screen.
Parameters
If the specified parameter is out of the allowable setting range, the minimum value (if the
lower limit of the range is not reached) or the maximum value (if the upper limit of the
range is exceeded) is set.
Query response {numeric}<newline><^END>
Corresponding
key
[Sweep] - EDIT LIST - PEN
SCRN
Syntax SCRN {ON|OFF|1|0}
Description Toggles on and off the LCD screen display. (No query)
Parameters
Corresponding
key
No front panel key is available to execute this function.
<numeric>
Description Pen number
Range 1 to 6
Initial value For the trace A: 3
For the trace B: 5
Resolution 1
Description
ON or 1 (initial value) Turns on the LCD screen display.
OFF or 0 Turns off the LCD screen display.

Agilent Technologies 4294A Specifications

General

Brand	Agilent Technologies
Model	4294A
Category	Measuring Instruments
Language	English