Agilent Technologies 4294A Programming Manual

Chapter 16 281
GPIB Command Reference
COLOR
16. GPIB
Command Reference
( * , A - E )
COLOR
Syntax COLOR <numeric>[PCT]
COLOR?
Description Sets the vividness (chroma) of the display color of the item selected with the “COLO”
command on page 280.
Parameters
If the specified parameter is out of the allowable setting range, the minimum value (if the
lower limit of the range is not reached) or the maximum value (if the upper limit of the
range is exceeded) is set.
Query response {numeric}<newline><^END>
Corresponding
key
[Display] - more 1/2 - MODIFY COLOR - MODIFY ITEM COLOR - MODIFY COLOR -
COLOR
COM{A|B|C}
Syntax COM{A|B|C}
Description Measures OPEN/SHORT/LOAD data for fixture compensation, calculates the
compensation coefficient, and stores it into the volatile memory (RAM). The “COMA”
command is for OPEN compensation data; the “COMB” command, for SHORT
compensation data; the “COMC” command, for LOAD compensation data. (No query)
Corresponding
key
[Cal] - FIXTURE COMPEN - {OPEN | SHORT | LOAD}
COMS
Syntax COMS
Description Lists the set values of the standard used for fixture compensation data measurement (the
values entered with the
“DCOMOPEN{G|C}” command on page 293,
“DCOMSHOR{R|L}” command on page 294, and “DCOMLOAD{R|L}” command on
page 292). (No query)
Corresponding
key
[Copy] - SELECT CONTENTS - COMPEN KIT VALUE 
<numeric>
Description Percentage of the most vivid status (status in which white and black are
not mixed completely)
Range 0 to 100
Initial value Varies depending on the display item selected with the “COLO”
command on page 280.
Unit % (percentage)
Resolution 1

Agilent Technologies 4294A Specifications

General

Brand	Agilent Technologies
Model	4294A
Category	Measuring Instruments
Language	English