Chapter 16 411
GPIB Command Reference
RESAVD
16. GPIB
Command Reference
( S - Z , :PROG )
RESAVD
Syntax RESAVD <string>
Description Updates the specified file on the built-in mass storage of the 4294A specified with the
“STOD” command on page 445. When specifying a file, use a file name including its
extension (refer to Table 8-1 on page 113). If the specified file does not exist, an error
occurs and the command is ignored. (No query)
Parameters
If the specified file name has characters that exceed the maximum length, only the string of
up to the maximum length is valid and the remaining characters are ignored.
Corresponding
key
[Save] - RE-SAVE FILE
RESD
Syntax RESD
Description Changes the measured value list display screen to the normal measurement screen. To
return to the list display screen, execute the
“LISV” command on page 341. (No query)
Corresponding
key
[Copy] - SELECT CONTENTS - LIST VALUE - RESTORE DISPLAY
<string>
Description File name (including the extension) you want to update
Range 12 characters or less (including the extension)
To Next Page
Loading...
Need help?
General
