Chapter 16 405
GPIB Command Reference
PRIC
16. GPIB
Command Reference
( O - R )
PRIC
Syntax PRIC {STAN|FIXE|VARI}
PRIC?
Description Sets the print color for printout.
Parameters
Query response {STAN|FIXE|VARI}<newline><^END>
Corresponding
key
[Copy] - SETUP - {B&W | FIXED COLOR | IMAGE COLOR}
PRINALL
Syntax PRINALL
Description Outputs as-is image displayed on the LCD screen to a printer. Note that, softkey label
output is disabled (specified to OFF with the
“PRSOFT” command on page 405), the
softkey labels at the left of the screen are not outputted. (No query)
Corresponding
key
[Copy] - START
PRSOFT
Syntax PRSOFT {ON|OFF|1|0}
PRSOFT?
Description When outputting the LCD screen to a printer using the “PRINALL” command on page
405, enables/disables the output of the description part (softkey label) of each softkey
displayed at the right of the screen.
Parameters
Query response {1|0}<newline><^END>
Corresponding
key
[Copy] - SETUP - more 1/2 - SOFTKEY on OFF
Description
STAN (initial value) Black and white output
FIXE Color output (clean colors when printed on white paper)
VA RI Color output (colors close to those on the display screen)
Description
ON or 1 Enables the softkey label output.
OFF or 0
(initial value)
Disables the softkey label output.
To Next Page
Loading...
Need help?
General
