454 Chapter 16
GPIB Command Reference
TINT
TINT
Syntax TINT <numeric>
TINT?
Description Sets the hue of the display color of the item selected with the “COLO” command on page
280 command.
Parameters
If the specified parameter is out of the allowable setting range, the minimum value (if the
lower limit of the range is not reached) or the maximum value (if the upper limit of the
range is exceeded) is set.
Query response {numeric}<newline><^END>
Corresponding
key
[Display] - more 1/2 - MODIFY COLOR - MODIFY ITEM COLOR - MODIFY COLOR
- TINT
TITL
Syntax TITL <string>
TITL?
Description For the active trace (set with the “TRAC” command on page 457), sets a string displayed in
the title area on the display screen.
Parameters
If the specified file name has characters that exceed the maximum length, only the string of
up to the maximum length is valid and the remaining characters are ignored.
Query response {string}<newline><^END>
Corresponding
key
[Display] - more 1/2 - TITLE
<numeric>
Description Value indicating the hue (0 or 100: red, 33: green, 66: blue)
Range 0 to 100
Initial value Varies depending on the display item selected with the “COLO”
command on page 280.
Resolution 1
<string>
Description String displayed in the title area
Range 65 characters or less
Initial value Blank ("")
To Next Page
Loading...
Need help?
General
